SuperSpeed SuperCache v5.0.524.0 | 13.37 Mb
SuperCache breaks the disk I/O bottleneck by using the computer's RAM to hold or contain the most frequently used disk data. This 'container' is referred to as a cache. With SuperCache, as a program sends and receives disk data, the most frequently used data is read from and written to RAM � not the hard drive � thus accelerating the program's performance. SuperCache implements our patented block-level cache technology to increase performance above that of the operating system�s file-level cache.
SuperCache is an excellent choice for these scenarios:
1). The data files are larger than available physical memory.
2). The data files are located on a disk partition or disk volume that is too large to fit into available physical memory, and cannot be moved to one where they will fit. (For example: Dragon Naturally Speaking v7.3 cannot be configured to place its data on a different drive.)
3). Minimum risk of lost data.
Unlike our RamDisk products not all the data will be available in RAM all the time. Some will come from the hard drive. Nonetheless, depending upon the size of the cache and the nature of the disk I/O demands, performance accelerations can be significant and often dramatic.
Deferred-write mode
By enabling its lazy-write mechanism, SuperCache can also accelerate writing data to disk. This mechanism delays writes to the hard drive. This can 'smooth out' I/O activity on the hard drive. It is important to note that enabling lazy-write increases the risk of data loss in the event of a system crash or power failure. SuperSpeed Software recommends that enabling the lazy-write feature ONLY on systems equipped with an Uninterruptible Power Supply (UPS).
SuperCache can be used to cache an entire system drive (e.g. drive C:) including the system pagefile. SuperCache is the appropriate choice when a particular program (e.g. database, game, etc.) needs to access very large amounts data.
Support for NUMA
Starting with Windows XP x64 through Wndows 7 x64 provides special support for machines with a non-uniform memory architecture (NUMA). When active on such platforms, the memory manager for SuperCache 5 examines the processor and memory affinities reported by Windows and the ACPI SRAT, and then optimizes physical memory allocations across the described NUMA nodes. The NUMA support in SuperCache 5 greatly improves the speed of memory allocations and equalizes the distribution of cache allocations among the NUMA nodes. Currently, NUMA support does not include the ability to build caches on specific nodes.
New Interface
SuperCache 5 now has a more user friendly and informative interface.
* Overview of available storage drives in system
* Caching graph showing 4 performance items
* Configure SuperCache by right clicking a volume
* Automatic configuration of boot drive (usually C:) during installation.
Added Feature called "Mirror Mode"
SuperCache Mirror Mode (formerly a separate product called SuperVolume) allows the user to duplicate an entire volume/partition into RAM. Learn more about Mirror Mode.
Quick start instructions:
There are two ways to configure SuperCache 5(SC5) either from Graphical User Interface(GUI) or via the Command Line Interface(CLI). SuperCache will be automatically enable on the boot volume (usually C:) if this option was selected during installation.
To configure or modify caching from the GUI
1). Double click the desktop icon.
2). Select a volume
3). Select either the first menubar icon OR Action -> Cache
- OR -
To access SC5 from the CLI
1). Open a Command Prompt with Administrative privileges
2). Type "vfcfg -help" will provide an overview of the command line syntax.
SYSTEM REQUIREMENTS :
� Windows 7 32 & 64-bit
� Windows Vista 32 & 64-bit
� Windows XP Professional, 32 & 64-bit
� Windows 2000 is NOT supported
Processor (CPU) Support
� 1 G Hz processor or higher
� All Intel and AMD Pentium-class platforms
� All Intel 64-bit processor families (except Itanium)
� All AMD 64-bit processor families
� All SMP (i.e. number of CPUs) configurations of the above that are supported by Windows�.
Operating system edition Maximum
� RAM Approx.% available for cache CPUs*
� Windows 7 32-bit(x86) 4 GB 50% 2
� Windows 7 64-bit(x64) 8-192 GB 75-95% 2
� Windows Vista 32-bit(x86) 4 GB 50% 2
� Windows Vista 64-bit(x64) 8-128 GB 50%-95% 2
� Windows XP Professional 32-bit(x86) 4 GB 75% 2
� Windows XP Professional 64-bit(x64) 128 GB 95% 2
*Socket limit that the operating system supports.
Install Notes :
1. Install the program but do not restart yet.
2. Copy the keygen to prog dir, i.e. "C:\Program Files\SuperSpeed\SuperCache\".
3. Run the keygen, and choose "SuperCache" then Patch the driver, and restart.
4. When Windows starts, navigate to prog dir, and run the keygen.
5. Choose "SuperCache" and click "Generate" to get your key file.
6. From your desktop, run "SuperCache" and click "File" -> "Licensing". Then click "Update" and "Browse" to your key file that has been generated in prog dir, and apply it.
7. DONE!
SuperCache is an excellent choice for these scenarios:
1). The data files are larger than available physical memory.
2). The data files are located on a disk partition or disk volume that is too large to fit into available physical memory, and cannot be moved to one where they will fit. (For example: Dragon Naturally Speaking v7.3 cannot be configured to place its data on a different drive.)
3). Minimum risk of lost data.
Unlike our RamDisk products not all the data will be available in RAM all the time. Some will come from the hard drive. Nonetheless, depending upon the size of the cache and the nature of the disk I/O demands, performance accelerations can be significant and often dramatic.
Deferred-write mode
By enabling its lazy-write mechanism, SuperCache can also accelerate writing data to disk. This mechanism delays writes to the hard drive. This can 'smooth out' I/O activity on the hard drive. It is important to note that enabling lazy-write increases the risk of data loss in the event of a system crash or power failure. SuperSpeed Software recommends that enabling the lazy-write feature ONLY on systems equipped with an Uninterruptible Power Supply (UPS).
SuperCache can be used to cache an entire system drive (e.g. drive C:) including the system pagefile. SuperCache is the appropriate choice when a particular program (e.g. database, game, etc.) needs to access very large amounts data.
Support for NUMA
Starting with Windows XP x64 through Wndows 7 x64 provides special support for machines with a non-uniform memory architecture (NUMA). When active on such platforms, the memory manager for SuperCache 5 examines the processor and memory affinities reported by Windows and the ACPI SRAT, and then optimizes physical memory allocations across the described NUMA nodes. The NUMA support in SuperCache 5 greatly improves the speed of memory allocations and equalizes the distribution of cache allocations among the NUMA nodes. Currently, NUMA support does not include the ability to build caches on specific nodes.
New Interface
SuperCache 5 now has a more user friendly and informative interface.
* Overview of available storage drives in system
* Caching graph showing 4 performance items
* Configure SuperCache by right clicking a volume
* Automatic configuration of boot drive (usually C:) during installation.
Added Feature called "Mirror Mode"
SuperCache Mirror Mode (formerly a separate product called SuperVolume) allows the user to duplicate an entire volume/partition into RAM. Learn more about Mirror Mode.
Quick start instructions:
There are two ways to configure SuperCache 5(SC5) either from Graphical User Interface(GUI) or via the Command Line Interface(CLI). SuperCache will be automatically enable on the boot volume (usually C:) if this option was selected during installation.
To configure or modify caching from the GUI
1). Double click the desktop icon.
2). Select a volume
3). Select either the first menubar icon OR Action -> Cache
- OR -
To access SC5 from the CLI
1). Open a Command Prompt with Administrative privileges
2). Type "vfcfg -help" will provide an overview of the command line syntax.
SYSTEM REQUIREMENTS :
� Windows 7 32 & 64-bit
� Windows Vista 32 & 64-bit
� Windows XP Professional, 32 & 64-bit
� Windows 2000 is NOT supported
Processor (CPU) Support
� 1 G Hz processor or higher
� All Intel and AMD Pentium-class platforms
� All Intel 64-bit processor families (except Itanium)
� All AMD 64-bit processor families
� All SMP (i.e. number of CPUs) configurations of the above that are supported by Windows�.
Operating system edition Maximum
� RAM Approx.% available for cache CPUs*
� Windows 7 32-bit(x86) 4 GB 50% 2
� Windows 7 64-bit(x64) 8-192 GB 75-95% 2
� Windows Vista 32-bit(x86) 4 GB 50% 2
� Windows Vista 64-bit(x64) 8-128 GB 50%-95% 2
� Windows XP Professional 32-bit(x86) 4 GB 75% 2
� Windows XP Professional 64-bit(x64) 128 GB 95% 2
*Socket limit that the operating system supports.
Install Notes :
1. Install the program but do not restart yet.
2. Copy the keygen to prog dir, i.e. "C:\Program Files\SuperSpeed\SuperCache\".
3. Run the keygen, and choose "SuperCache" then Patch the driver, and restart.
4. When Windows starts, navigate to prog dir, and run the keygen.
5. Choose "SuperCache" and click "Generate" to get your key file.
6. From your desktop, run "SuperCache" and click "File" -> "Licensing". Then click "Update" and "Browse" to your key file that has been generated in prog dir, and apply it.
7. DONE!
Silahkan tinggalkan komentar anda, baik saran atau kritik. Satu Komentar sangatlah berharga asalkan jangan nyepam